Hi Ziva Team, I'm sorry if this is an old issue or a silly problem. But I've been working on my fascia for almost 2 weeks now and it's driving me crazy. I've posted the issue two days ago but I took it down after an hour and decided to give it another try. But unfortunately it's really not working for me.
My issue is the fascia seems to be sliding with my zBones during sim, and the front legs seems to be merging together even if there are no accidental attachments on either of the legs. The fascia will eventually falls down, but by looking at the sim there are actually collisions.
I slowly followed Andy's video and documentations and checking Mr. Ink's scene files as well. I know I am doing something wrong or maybe its too technical for me to solve it, any help would be so much appreciated.
Thank you so much and looking forward to your help.
Here are settings I've changed so far:
zTet = 2
Collision Detection = ON
Collision Point Spacing = 0.001
Substeps = 3
Gravity = -10
Solver Scale 45
Start Frame = -10 (I'm starting at default pose)
zTet = 2 (from 10)
inner_skinMaterial (2nd material)
Mass Density = 106
Rest Scale 1
Pressure = -2500
Surface Tension = 45
Youngs Modulus Exp = 103
Rest Scale Env & Pressure Env keyed from 0 (frame 1) to 1 (frame 5)
Contact Stiffness Exp 107