tristan_cordeboeuf
Hi tristan
The initial movement was slower and there were no errors, but as the speed of the movement gradually increased, these problems occurred.
I have adjusted the cross between the muscles, there is no interspinning problem, except for certain crosses in the joints during exercise.
I adjusted all the relevant values below, but still can't solve it, it is very desperate.
Thanks for your reply.
zSolver
Collision Point Spacing
Substeps
Frames Per Second
zCloth
Contact Stiffness
Contact Stiffness Exp
zBone
Contact Stiffness
Contact Stiffness Exp
zMaterial
Bend Stiffness
Bend Stiffness Exp
Rest Scale
Pressure