thanapooms
Hey okay so we did some digging today and discovered when the issue was introduced. So currently what you're using is the following:
zBuilder.builders.ziva as zva
z = zva.Ziva()
z.retrieve_from_scene()
As a work around for now, what you can use is this:
Firstly select zSolver1. (if you have more than one zSolver, select them all to capture the whole scene)
Run this:
zBuilder.builders.ziva as zva
z = zva.Ziva()
z.retrieve_from_scene_selection()
Everything else is the same and should work.
Let me know if that works for you. We should be rolling out a fix before too long so you don't have to do the workaround.
Thanks again!
Andy